How to Setup Asus Router ? A Step By Step Guide to Install or Configure For Internet Settings

Hello Friends,

Today I'll teach you how to setup Asus Router for Internet Connection before telling the procedure i would like to say that there a bit difference in settings of Modem + Router (DSL) & only Routers, so lets gets started, First of all Make it clear which router you have DSL or RT ?

Things needs to be done before configuration :
1. Log on your computer as a administrator with full admin rights
2. Turn off Firewall from both public & private networks
3. Turn off Wifi as we are going to connect Lan cable ( Rj 45)
4. Reset your Browser & clear complete history, cahce & cookies
5. Check whether you have your ISP details or not ? & your internet is up or not ?



If you were trying to set it up before so, please try a Hard Reset of your Router

How to Hard reset you Router ?

1. Turn On your Router & connect it to the computer using lan cable to one of the Lan Port.

2. Unplug the ISP cable from wan port of router if connected

3. Look at the rear side of your router here you can see either a button or hole for reset

4. Press the reset button if there is hole use any pointing device i.e. pin or pen & press it for 20 Sec.

5. now wait & watch the Leds of your router will flicker, it flash twice in a second it indicates your

    router is reseting wait for some time

Router Setup for : DSL (Modem + Routers) 

 Internet Settings Configuration :

1. After plugging internet cable
2. Open your browser & type 192.168.1.1 in the addresse bar
3.  Put default user name : admin & password : admin
4.  At the left-side, click on ‘QUICK INTERNET SETUP’

STEP-1 WEB ACCOUNT SETUP. Here we can change the default password of the admin account of router if required. Else, select the username ‘admin’ & enter ‘admin’ in choose password & confirm password fields. 

STEP-2 ‘NTP CONFIGURATION’. NTP stands for Network Time Protocol which is used to synchronize the time clock on the internet with a router. Select the time zone as +0530/Chennai, Mumbai, Kolkata, New Delhi and then click on next. 

STEP-3 ‘WAN CONNECTION SETUP’ page. First select the country as INDIA, and then select the ISP. Typically the connection type will be either PPPoE (eg. BSNL_PPPoE, Airtel_PPPoE) or Static IP (incase the ISP provides a fixed IP to the customer). After selecting the connection type, leave all the settings to their defaults and ask whether the customer knows about the VPI & VCI values provided by ISP. However, when the ISP will be selected, these values will be filled-in automatically. In case the ISP is not listed, select ‘others’ & enter the respective VPI/VCI values. Next to this, provide the USERNAME & PASSWORD given by the ISP on this page. Now click on next. 

STEP-4 WLAN INTERFACE SETUP page. Provide the SSID name, authentication type, password, and then click on next. 

STEP-5 SUMMARY page. Check the settings once again on this page and then click on Finish. 

If all the settings are correct, the ADSL light will be stable and the Internet light will come up. (Usually within a minute or two & green/blue color LED will come in stable state.) If ADSL is blinking constantly, then there is a fault from ISP’s end/ some problem with the router. If ADSL is stable & the internet light is down, then there is some fault in either the credentials/WAN settings or with the router itself. In such cases, please check with ISP.

-------------------------------------------------------------------------------------------------------------------------------

Router Setup for -  "RT Routers" 

 Internet Settings Configuration :  { By Qis Wizard }

Note :- Mostly ISP provides Automatic IP or Dynamic Connection type If Your Connection Type is in PPPoE then Configure as a Wireless Switch Click Here

1. After plugging internet cable
2. Open your browser & type 192.168.1.1 in the addresse bar
3.  Put default user name : admin & password : admin
4.  Click on Go

 5. Put new credentials

6. click next & your Router will automatically detect the connection type however you must get the details from isp i.e., which is your connection type ?

7. Mine is Automatic Local cable net so i've choosen automatic

 8. One more important thing you must know about your connection whether your connection is Mac binded or not ? my connection is not mac id binded so left the field blank & click on Next

 9. Select connect to Dns server automatically -- Yes

10. Here Put your Wireless details & Apply

-----------------------------------------------------------------------------------------------------------------------------

Router Setup for RT Routers / Internet Settings Configuration :  { By Manual Settings }

1. Open a web browser and browse to the following page :192.168.1.1
2. If you are prompted for a User name and Password enter the User nameadmin and Password admin. 
   
   
   
3. Once you are logged in select WAN. 
   
   
   
4. The WAN – Internet Connection page should appear. 
   
   
   
5. In the Basic Config section enter the following details: 
   WAN Connection Type: PPPoE 
   Enable WAN: Yes 
   Enable NAT: Yes 
   Enable UPnP: Yes 
   
   
   
6. In the WAN IP Setting section set Get the WAN IP automatically to Yes. 
   
   
   
7. In the WAN DNS Setting section set Connect to DNS Server automatically to Yes.
   
   
   
8. In the Account Setting section enter the following details: 
   User Name: You should enter the connection username in your Broadband Connection details email – the username will be in the format of zen12345@zen ("zen" followed by numbers and "@zen"). 
   Password: Enter the Password provided in your Broadband Connection details email - the password will be a mixture of letters and numbers, and is case-sensitive, so should be entered exactly as it appears in your Technical Details.
   Idle Disconnect Time in seconds: 0 (zero)
   
   Click Apply once you’ve entered these details.
   
   
   

The setup should now be completed and you can start using the Internet.

Click Here......  to Setup a Linksys router with Cable Internet service